"Will you step into my parlor?" said the spider to the fly;
"'Tis the prettiest little parlor that ever you did spy.
The way into my parlor is up a winding stair,
And I have many pretty things to show when you are there."
-by Mary Howitt (1799-1888)
Imagine given an opportunity to take an average normaleveryday lab, and transform it into what Hollywood has led the general pubic tobelieve is the norm. Movies likeHackers, The Matrix, and even Johnny Mnemonic was the basis for SpiderLabs'Razor/Blade lab transformation.
The Razor/Blade lab was only a year old when this project was started in December 2012 as SpiderLabs' just moved into the new office space the end of December 2011. It took 6 months to complete this project as various items, or "ingredients", needed to be purchased, shipped, and put together.
Decorative Sheet Metal
Needle & Thread
Wall mount Articulating Arm Brackets for LCD Monitors
Neon Dry Erase Markers
Black Light Reflective Ink
Black Light Gaffer Tape
Color Changing LEDs from IKEA
Before project start…
Workbench with shelves.
Wall between bench and closet.
Back wall and rack.
Dry erase wall.
The side wall next to the work bench had everything removedfrom the wall, holes patched, and repainted a darker blue to create a blankcanvas.
The short wall next to the rack was also painted a darkergray than the original for additional contrast.
The workbench area had color changing LED lights fromIKEA added under the shelves to add light once the room was darkened. Decorative baskets were added to clean up thebottom shelf.
OpticzUV Blacklight Reactive Blue Invisible Ink was used onthe dark wall. This was hand painted on withthe help of a LCD projector to trace the design. A foam brush was used as theink has the consistency of water. And a little went a long way. We'll be ableto have raves in the lab for years to come.
Three LCD monitors were mounted on the shorter wall by therack with wallmount articulating arm brackets.
Blacklight reflective gaffer's tape was used to create a spider's web on theback wall behind the rack.
As Johnny Mnemonic and Tetsuo were called out explicitly fordesign inspiration, tubularcrin, which is generally used to createcyberlock hair pieces, was used.
Once more the gaffer's tape was used to make the monitors"pop" off the wall.
Then, the ordinary lights were removed, andreplaced with black lights.
What was subtle with normal light, is amazing with blacklight.
LCD wall with black light.
Rack and back wall with black light. At some point in the future, a second rack will be added to the back wall area and the network equipment moved off the top shelf over the workbench.
An old unused desktop was setup to play The Matrix, Hackers,and Johnny Mnemonic on a loop on the top monitor.
Additional tubular crin was added to the monitors and takenup to the rack.
Moreover, a keyboard tray was made from particle board,painted black, and gaffer's tape added to the trim. Then it was mounted onto the wall with anarticulating arm bracket.
The arm is tilted downwards to simulate the keyboard beingup on legs. Velcro was used to mount itdirectly to the tray so it won't fall off.
Additional gaffer tape was run along the overhead wiringrack.
Two clamp-on lights were attached to the wiring rack toprovide actual light as needed in the lab.
LCD wall finished with black light.
And what fun would a dry erase wall be without neon dry erasemarkers to draw on it?
[Disclaimer: This is probably the cleanest work lab ever seen due to pictures being taken for this blogpost. Please don't expect to ever visit it and have it look this organized again.]